Qwen Image Edit for Urbanism continues to evolve into a practical, research-grade tool for architectural and urban experimentation. After the batch-processing capabilities introduced in v1.2, version 1.3 focuses on the feature most requested by designers and analysts: precise control over where edits occur.

In image-to-image workflows, uncontrolled changes are a common issue. Even a very specific prompt can lead diffusion models to reinterpret the whole scene. Version 1.3 introduces mask-restricted editing, allowing Qwen to modify only a selected region while preserving the rest of the image exactly as it is.

Until now, the workflow relied on Empty Latent to initialize diffusion. This approach is simple but has an unavoidable drawback:

The entire latent space is regenerated — even outside the region you want to modify.

This often produces familiar and unwanted side effects: façades shift slightly, lighting changes, road textures dissolve, or skies take on new tones, even when the prompt refers only to a specific object or surface. To address this, v1.3 reorganizes the initialization stage around:

VAE Encode → Set Latent Noise (masked)

This change restructures the model’s behavior:

This leads to crisp preservation of buildings, street furniture, sky, shadows, and lighting outside the edited zone. Localized edits integrate naturally: you can green a façade, test a bike lane, adjust a plaza boundary, or replace a storefront without disturbing the rest of the street.

Version 1.3 supports both textual and visual control of masked edits.

A. Prompt-Only Mask Editing

You draw a mask, provide a prompt, and Qwen modifies only the selected region. This works especially well for operations such as:

• replacing asphalt with permeable paving,

• adding vegetation,

• transforming a façade material.

B. Mask Editing With a Reference Image

A second image may be supplied to guide structure, texture, or color. This enables:

• borrowing material samples,

• transplanting vegetation from one scene to another,

• matching architectural textures,

• transferring lighting characteristics locally.

Both modes are interchangeable, and both respect the mask boundary. Masks drawn directly in ComfyUI are typically sharp, binary shapes. Diffusion models, however, perform best when mask boundaries are soft and slightly extended.

Version 1.3 introduces a Grow Mask node with two parameters:

• Expand: increases the mask outward, helping cover tiny gaps or irregular brush strokes and preventing thin seams at the edge.

• Blur Radius: softens the boundary, allowing Qwen to blend new and existing textures more naturally.

Together, these parameters define the effective “influence zone” of the edit.

The mask block replaces only the latent-initialization stage.

Everything else — prompts, reference conditioning, sampling, and the full QwenEdit pipeline — remains unchanged.

Simplified pipeline:

This structure makes editing predictable and reproducible, but it is important to clarify how v1.3 is organized internally. The workflow is now composed of three completely separate blocks, and each block loads its own model:

• Block 1: Single-image edit (prompt-only or prompt + reference)

• Block 2: Sequential multi-image editing

• Block 3: Mask-based editing (new in v1.3)

All three blocks coexist in the same workflow, and the user simply chooses which one to run.
In ComfyUI, this is done by right-clicking the group frame and selecting Active or Bypass.
Only the active block executes; the others are skipped. Nothing else in the pipeline needs to be changed.

Because the blocks are independent, they can also be combined. For example, the user may activate the sequential loader from Block 2 and route its output into the mask-editing block (Block 3) to run a full masked transformation on a batch of images.

To create the mask itself, the user loads the base image in Load Image 1, right-clicks the preview, and selects Open in Mask Editor. The drawn mask is then processed by the Grow Mask node before entering the latent-noise stage, ensuring smooth boundaries and predictable behavior.

To test the new mask-based editing block, we start by defining the editable region directly in ComfyUI. After loading the base image, the user right-clicks the preview and selects “Open in Mask Editor”, then paints the area where the new cyclist should appear. Before the edit, this part of the street is empty.

Once the mask is created, it flows through Block 3: the Grow Mask node expands and softens the boundary, the workflow encodes the base image, and noise is added only inside the masked zone. A second image containing a cyclist is provided as a reference, and the prompt instructs Qwen to place the rider onto the bicycle lane.

The result is a localized insertion: the cyclist from Image 2 is generated precisely inside the masked area, while the rest of the photograph remains unchanged. This demonstrates the core purpose of Block 3 — precise, mask-controlled edits that do not disturb the surrounding urban context.

You can download the ready-to-use ComfyUI JSON graph that we built in this post Qwen Image Edit For Urbanism v1.3 from the link below or from our git repository and load it directly into your workspace using File → Load → Workflow.

The Qwen Image Edit for Urbanism workflow has progressively evolved from single-image editing (v1.0) to paired image transformations (v1.1). Now, with v1.2, it gains the ability to process multiple images sequentially, fully offline and reproducibly, using custom Python nodes inside ComfyUI. This new release empowers urban researchers, designers, and architects to perform batch edits — such as modifying entire image series of the same street, plaza, or neighborhood — using consistent prompts or iterative refinements.

At the heart of this version are three lightweight, open-source Python nodes developed by UGA for ComfyUI. These nodes are available immediately after installing the repository — either by running git clone https://github.com/perezjoan/ComfyUI-QwenEdit-Urbanism-by-UGA or by downloading and unzipping the repository manually into your  ComfyUI/custom_nodes directory.

These nodes constitute the backbone of the v1.2 workflow. Together, they enable automation:

[6 Input Images]
      ↓
Sequential or Random Loader (1 image per run)
      ↓
QwenEdit pipeline
      ↓
Stateful Collector (stores run#1..run#6 results)
      ↓
6 preview nodes

You launch the queue once (6 jobs) → Go drink coffee → Return to find all 6 processed urban edits displayed.

A ComfyUI custom node is simply a Python class placed inside the ComfyUI/custom_nodes/ directory. When ComfyUI starts, it scans this directory, imports every .py file, looks for a NODE_CLASS_MAPPINGS dictionary, and registers each class it finds as a new node type. There is no compilation step and no special installation procedure: placing the file in the folder and restarting ComfyUI is sufficient for the node to appear in the interface.

Internally, each node follows the same structure. The INPUT_TYPES classmethod declares the input sockets that will be displayed in the UI. For example:

@classmethod
def INPUT_TYPES(cls):
    return 

This tells ComfyUI to generate two inputs—an image tensor and an integer. Similarly, the node declares its outputs through RETURN_TYPES and RETURN_NAMES:

RETURN_TYPES = ("IMAGE", "INT")
RETURN_NAMES = ("selected_image", "index")

Each node also defines a FUNCTION attribute, which names the method ComfyUI should call during execution:

FUNCTION = "select_next"

ComfyUI will therefore execute:

def select_next(...)

whenever the node evaluates. To make the node visible, every Python file ends with a registration block:

NODE_CLASS_MAPPINGS = 
NODE_DISPLAY_NAME_MAPPINGS = 

When the package contains multiple nodes, the root __init__.py merges all registration dictionaries into a single set that ComfyUI loads on startup. This mechanism allows the repository to expose several custom components while keeping each node defined in its own file.

The repository layout is straightforward and in our case is:

ComfyUI/
  custom_nodes/
    ComfyUI-QwenEdit-Urbanism-by-UGA/
       __init__.py
       sequential_image_selector.py
       random_image_selector.py
       stateful_collector.py
       debug_print.py

Version 1.2 reorganizes the Qwen Image Edit for Urbanism workflow into two blocks: the original single-image editor, and a new sequential pipeline that can process up to six images across consecutive queue runs. The sequential block relies on two custom nodes. The Sequential Image Loader takes up to six input images and outputs one image per run, advancing automatically each time you press “Queue Prompt.” Its output replaces the single-image input in the Qwen Edit chain. After editing, the processed image and the loader’s index are passed into the Six-Slot Image Buffer, which stores each result in the corresponding output slot while filling unused slots with placeholders to keep previews stable. Connecting each slot to a Preview node lets you watch the six results populate as the workflow iterates. A third node, the Random Image Selector, is included for users who prefer stochastic selection, but it is not wired into the default v1.2 workflow.

The Random Image Selector follows the same logic as the sequential loader — multiple inputs, a single image output — but selects randomly instead of sequentially. Users who want stochastic variations, probabilistic sampling, or diversity testing may insert this node in place of the sequential loader.

To evaluate how well the model can merge ecological elements across scenes, we ran an experiment where vegetation from one photograph is transplanted into another.

After letting the workflow run its full sequence while grabbing a coffee, the results appeared consistent and correctly distributed across the six preview slots. As expected with generative editing, however, the prompt is not always obeyed with perfect precision: in some cases, Qwen may copy elements from the second image that are not vegetation — such as pieces of façade, lighting color, or background tones. This happens because the model interprets the entire scene contextually rather than isolating objects.

That’s where the next upgrade (v1.3) comes in: mask-based control. By allowing users to explicitly define which areas of the base image should be modified (and which should remain untouched), masks will significantly reduce unintended transfers and keep the edits focused strictly on the desired objects. Until then, the seed parameter remains the best tool for refinement — simply rerun the workflow with new seeds until you achieve the cleanest integration.

You can download the ready-to-use ComfyUI JSON graph that we built in this post Qwen Image Edit For Urbanism v1.2 from the link below or from our git repository and load it directly into your workspace using File → Load → Workflow.

In the first part of this series, we built a fully local image-editing pipeline for urban and architectural visualization using ComfyUI and Qwen-Image-Edit. That version (v1.0) demonstrated how to run generative image edits entirely offline, combining text and visual prompts to transform cityscapes with instructions like:

“Add trees along the sidewalk” or “Turn this street into a pedestrian plaza.”

We assume that you have followed this tutorial before diving in this new update. Now, with version 1.1, we take that foundation further. This update focuses on advanced sampling control and multi-image editing, allowing you to not only modify a scene, but also merge visual elements across images — for instance, importing a bench from another photo, or changing a building façade to match a different material texture.

First, this update focuses on improving both quality and flexibility. The base structure still uses the Qwen-Image-Edit 2509 model in GGUF format, but adds a refined sampling module to stabilize lighting and surface detail.

The key new nodes are:

• ModelSamplingAuraFlow — smooths the diffusion trajectory for more natural transitions.

• CFGNorm (BETA) — balances prompt adherence with photorealism, preventing overexposed textures.

• LoraLoaderModelOnly — injects a Lightning LoRA (4-step or 8-step) for faster inference and higher-quality reconstruction.

These three nodes form the core control chain of version 1.1:

This configuration produces more stable, consistent outputs while preserving prompt flexibility. It also enables fine-tuning of how the model interprets text instructions versus existing image content—ideal for architectural and material edits. Before connecting the new nodes, you’ll first need to download a Lightning LoRA model — an additional lightweight module that enhances reconstruction quality and speeds up inference.

You can find all Lightning variants here:
🔗 https://huggingface.co/lightx2v/Qwen-Image-Lightning/tree/main

Refer to the table below to choose the most appropriate file for your setup:

Once downloaded, place your chosen .safetensors file in the following directory:

ComfyUI/models/loras/

Then, return to ComfyUI and insert the three nodes shown below

The new sampling nodes add subtle but powerful control options:

Version 1.1 introduces a new input configuration that allows two images to be used within the same workflow. This enhancement enables contextual or compositional edits where one image serves as the main canvas, and the other contributes visual information such as an object, texture, or architectural detail.

In this setup, Image 1 remains the base image. Its dimensions define the output size, ensuring consistent framing and spatial coherence. The second image (Image 2), on the other hand, is resized during processing but it is only to prevent memory overload—particularly important for mid-range GPUs.

As shown in the examples below, you can combine a base image (image 1) with up to two additional inputs (image 2, image 3) to guide the edit more precisely. In this tutorial, we focus on using one additional image — for instance, adding an object or transferring a material. In the first example, image 2 (the red car) is inserted into image 1 using the prompt: “add image 2 red car into the street of image 1.” The second case changes the wall material of image 1 based on the texture of image 2 (a brick wall). Finally, the third example adds a bench into an urban scene using image 2 as the visual model reference.

Each output remains consistent in perspective and lighting, showing that the model now integrates context more effectively. The improved accuracy comes from the two cumulative upgrades introduced in v1.1: the new core control chain and the Dual-Image Editing. Despite the added complexity, the workflow remains extremely fast. Even when using the 8-step Lightning model, processing time never exceeds 130 seconds, while the 4-step variant typically completes in about 30-40 seconds on an RTX 4060 GPU. In the next update, we’ll introduce inpainting with mask support, allowing users to define editable regions directly within the image — ideal for selective urban design modifications.

Lightning LoRA models: https://huggingface.co/lightx2v/Qwen-Image-Lightning

Once again, for convenience, you can download the ready-to-use ComfyUI JSON graph that we built in this post Qwen Image Edit For Urbanism v1.1 from the link below and load it directly into your workspace using File → Load → Workflow.

Generative AI offers new possibilities for urbanism and architectural visualization. However, most workflows depend on cloud models, paid APIs, or GPU-heavy setups. Instead, this guide shows how to build a fully local image-editing pipeline using ComfyUI and Qwen-Image-Edit, a multimodal model that interprets both text and images. Moreover, the quantized GGUF version makes it light enough to run efficiently on GPUs with 8 GB VRAM—or even on CPU-only machines.

With this setup in place, you can make realistic, controllable visual edits to urban scenes directly from text prompts such as:

“Add trees and benches along the sidewalk”
“Change this building to have shops on the ground floor”
“Replace the cars with a pedestrian plaza”

In summary, this guide includes three main parts: first, installing and preparing the models; second, building the ComfyUI workflow; and finally, experimenting with parameters such as CFG, denoise, and steps to refine quality.

Let’s start with the setup.

Before we dive into editing cityscapes and architectural images, let’s prepare a fully local environment. To begin with, this workflow runs entirely offline — no API keys, no cloud GPU, and no data uploads. As a result, you can experiment freely without any external dependencies.

Step 1 — Installing ComfyUI

ComfyUI is a visual AI workflow tool that lets you build image-generation and editing pipelines by connecting nodes instead of writing code. Think of it as a visual editor for generative models — you drag boxes, connect them with lines, and watch your AI process unfold step by step. It’s extremely powerful for image editing, concept design, and urban visualization, because you can control every part of the process: model loading, prompt conditioning, sampling, decoding, and saving. This makes it ideal for architects, urbanists, and researchers seeking privacy and control. On first launch, an empty grid appears as your workspace, ready to be filled with interconnected nodes for models, images, and prompts.

ComfyUI can be installed in two ways:

• Standalone version: downloaded from the official website and installed like a regular application. This version already includes the Node Manager, so you can install missing custom nodes directly from the interface.

• Git version: installed by cloning the repository (e.g., for advanced users or custom setups). In this case, you must install the Node Manager manually, because it is not included by default.

Next, open the v1.0 workflow for Qwen Edit for Urbanism. You can find it at the end of the post or in our Git repository. When the workflow loads, the Node Manager will automatically prompt you to install any missing custom nodes. Approve the installations, then close the workflow.

Step 2 — Add GGUF and Qwen Image Edit Support

Qwen-Image-Edit is a multimodal AI model capable of understanding both text and images, allowing image edits through natural language. The GGUF format makes it compact and memory-efficient, enabling faster processing on modest hardware.

Go to the ComfyUI-GGUF & Qwen Edit Utils project pages:
https://github.com/city96/ComfyUI-GGUF
https://github.com/lrzjason/Comfyui-QwenEditUtils

Clone the repositories, or click the green Code button and choose “Download ZIP” for both projects. After downloading, unzip each folder and place it directly into your custom_nodes directory—make sure the unzipped files are not nested inside an extra subfolder.

ComfyUI/custom_nodes/

Step 3 — Download the Required Models

You’ll need three model files, each serving a different purpose in the image-editing process. The first one is the core model that performs the actual visual transformation based on your text prompt.

You can find it here:

👉 https://huggingface.co/QuantStack/Qwen-Image-Edit-2509-GGUF/tree/main

On that page, you’ll see many versions of the same model — Q2, Q3, Q4, Q5, etc. These are quantized variants, meaning they trade a little precision for faster speed and lower VRAM usage. Here’s a quick guide to help you pick the right one:

The Qwen-Image-Edit model also needs two smaller files to work correctly — one for understanding your text prompts (CLIP) and one for turning the generated data back into a real image (VAE). You can download them from the official Comfy-Org repository on Hugging Face:

• Text Encoder (CLIP):
  https://huggingface.co/Comfy-Org/Qwen-Image_ComfyUI/tree/main/split_files/text_encoders

  On that page, pick:
  👉 qwen_2.5_vl_7b_fp8_scaled.safetensors (about 9 GB — faster and works well locally)

• VAE Decoder:
  https://huggingface.co/Comfy-Org/Qwen-Image_ComfyUI/tree/main/split_files/vae

  Download the file:
  👉 qwen_image_vae.safetensors

Once downloaded, place all three models in:

ComfyUI/
 └── models/
      ├── gguf/
      │    └── Qwen-Image-Edit-2509-Q5_K_S.gguf
      ├── clip/
      │    └── qwen_2.5_vl_7b_fp8_scaled.safetensors
      └── vae/
           └── qwen_image_vae.safetensors

Verifying Your Setup

Open ComfyUI, right-click anywhere in the workspace or search in the node library, and check that you can find these nodes:

• • GGUF Loader – for loading the main Qwen-Image-Edit model (.gguf file)
  • CLIP Loader – for loading the CLIP text encoder
  • VAE Loader – for loading the VAE decoder
  • TextEncodeQwenImageEditPlus – for connecting text prompts and images

If they appear and can detect your downloaded files, congratulations 🎉 — your local setup is ready!

Now that all the models are downloaded and organized, you can start assembling the full workflow that makes Qwen-Image-Edit operate inside ComfyUI.
At this stage, the goal is to connect every component — the GGUF model, the text encoder (CLIP), the VAE decoder, the input image, and the text prompt — into a single functional chain. Once everything is linked, you’ll be able to type instructions such as “add shops on the ground floor” or “turn this street into a pedestrian zone” and watch ComfyUI generate updated images automatically.

Connecting the Model to Your Images and Prompts

Now that your model nodes are ready, it’s time to make them work together. You’ll connect your input image, prompt, and the Qwen-Image-Edit conditioning node so that ComfyUI can understand your instruction and modify the picture accordingly.

Right-click again and search for:

• Load Image – this node will import your input image (for example, a street or building photo).
• TextEncodeQwenImageEditPlus – this node combines your image with your text prompt

Adding the KSampler and the Other Required Elements

At this point, your setup has the model, encoders, and the prompt connection ready.
Now we’ll add the KSampler, which is the part that actually produces your final edited image, and all the other required elements.

Right-click again and search for:

• KSampler – this is ComfyUI’s main diffusion sampler. It takes in a latent (from the VAE) and conditioning (from Qwen) to generate a new image.
• Scale Image to Total Pixels – automatically resizes your image to a manageable resolution (set megapixels to 1.00).
• Get Image Size – extracts width and height from the resized image.
• EmptySD3LatentImage – creates an empty latent space matching the image dimensions, used as the canvas for generation.
• VAE Decode – converts the generated latent output back into a normal image.
• Save Image – saves your result to the ComfyUI output folder.

Your connections should look like this (check the figure for reference). Start by linking the Load Image node to Scale Image to Total Pixels, and then feed its output into Get Image Size. Next, connect the width and height outputs from Get Image Size to EmptySD3LatentImage, creating the correct latent dimensions. From there, route the latent output of EmptySD3LatentImage into the KSampler. In parallel, connect the model input of KSampler to the GGUF Loader, and feed the conditioning from TextEncodeQwenImageEditPlus. Finally, send the KSampler output into VAE Decode, and link that to Save Image to generate and store your final result.

Once these elements are connected, your workflow becomes fully functional. The scaled image is analyzed, encoded, transformed in the latent space according to your text prompt, and then decoded back into a visible edited image — all processed locally by your computer.

The core of the image-editing process lies in the KSampler node, where all generative inference occurs. Inside this component, several parameters control the quality, variability, and precision of the output. Understanding their effect is essential for achieving consistent and reproducible results.

To begin with, the seed parameter defines the random starting point of the diffusion process. Using the same seed with identical settings reproduces the same output, which helps when comparing the influence of other parameters. By contrast, changing the seed introduces controlled randomness, often generating new interpretations of the same instruction. Meanwhile, the control after generate option—set to increment—ensures each new image uses a slightly different seed, producing unique but related results.

Next, the steps value determines how many refinement iterations the sampler performs. Lower values such as five create quick previews and coarse adjustments, whereas higher counts (for instance, twenty or thirty) yield smoother and more detailed outcomes at the cost of longer processing time. In practice, Qwen-Image-Edit performs well even with fewer steps, since it relies heavily on prompt and image conditioning.

Similarly, the cfg parameter (classifier-free guidance) controls how closely the output follows the text prompt. A low value around 1.0 keeps changes subtle, while higher values push the model toward stronger, more literal transformations. Balancing this setting helps maintain realism without losing creative control.

As for the sampler_name and scheduler, they define how noise is reduced during diffusion. The Euler sampler offers an efficient trade-off between speed and visual quality, and the simple scheduler keeps results stable across seeds and image sizes.

Finally, the denoise value adjusts how strongly the latent image is modified. A setting of 1.0 applies a full transformation, producing bold edits, whereas smaller values retain more of the original features for subtle modifications. This parameter directly shapes the intensity of your edit—from a light retouch to a complete visual overhaul.

These results show the outcomes obtained with the final Qwen-Edit workflow, each generated from the same base image using a simple text prompt. Depending on the complexity of the requested transformation and the parameters defined in the KSampler—particularly the number of steps and the denoise factor—the processing time varied between 30 seconds and about 2 minutes on an RTX 4060 GPU.

• Qwen-Image-Edit official repository: https://huggingface.co/QuantStack/Qwen-Image-Edit-2509-GGUF

• ComfyUI documentation and examples: https://github.com/comfyanonymous/ComfyUI

• Qwen-Image-ComfyUI utilities and text encoders: https://huggingface.co/Comfy-Org/Qwen-Image_ComfyUI

• Zhang, F., Salazar-Miranda, A., Duarte, F., Vale, L., Hack, G., Chen, M., Liu, Y., Batty, M. & Ratti, C. (2024) ‘Urban Visual Intelligence: Studying Cities with Artificial Intelligence and Street-Level Imagery’, Annals of the American Association of Geographers, 114 (5), pp. 876-897. https://doi.org/10.1080/24694452.2024.2313515

• Perez, J. & Fusco, G. (2025) ‘Streetscape Analysis with Generative AI (SAGAI): Vision-language assessment and mapping of urban scenes’, GeoSpatial Analysis and Modelling, 100063. https://doi.org/10.1016/j.geomat.2025.100063 (ScienceDirect)

For convenience, you can download the ready-to-use ComfyUI JSON graph that we built in this post from the link below and load it directly into your workspace using File → Load → Workflow.